Canon imagePROGRAF iPF6300S User Manual page 938

Control Panel > Printer Menu
Main-
Clean Platen
te-
nance
Inter- EOP Timer
face
Setup
TCP/
IP
9
920
Net-
Ware
Menu Settings
>
Setting Item
IPv4 IPv4 Mode
Proto- DHCP
col
BOOTP
RARP
IPv4 IP Address
Set-
Subnet Mask
tings
Default G/W
DNS DNS Dync update
Set-
tings
Pri. DNS
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name
DNS Domain
Name
IPv6 IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS DNS
Set- Dync
tings update
Pri. DNS
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name
DNS Domain
Name
NetWare
Frame Type
Description, Instructions
Move the Carriage in preparation for cleaning the
Platen.
Specify the timeout period before cancellation of print
jobs that cannot be received by the printer.
Choose whether the printer IP address is configured
automatically or a static IP address is entered manual-
ly.
Specify the protocol used to configure the IP address
automatically.
Specify the printer network information when using a
static IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
The value that was automatically configured is dis-
played if you have set IPv4 Mode to Automatic.
Specify whether DNS server registration is updated
automatically.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
State- Specify whether DNS server registration is updated
full automatically.
Addr
State-
less
Addr
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Specify the frame type to use.
iPF6300S