Remove Paper - Canon imagePROGRAF iPF6400 User Manual

Preparing to Transfer the Printer
•
Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer (that is, when
you execute the printer menu item to prepare for transfer).
Note
•
This work is not necessary when carrying the printer or moving it while mounted on the optional stand.
When carrying the printer, always have three or more people securely hold the Carrying Handles in the left and right sides of
the base and keep the printer level.
Items to Prepare
Setup Guide
Packaging material
New Maintenance Cartridge (2)

Remove paper

1
Remove the paper.
• Rolls (See "Removing the Roll from the Printer.")
Sheets (See "Removing Sheets.")
•
Access the Prep.MovePrinter menu
1
If the Display Screen shows a message instructing you to replace the Maintenance Cartridge, replace the
Maintenance Cartridge.
(See "Replacing the Maintenance Cartridge.")
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
•
Note
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Prep.MovePrinter, and then press the OK button to display the confirmation screen.
5
Press ▲ or ▼ to select Yes, and then press the OK button.
Once preparations are finished, a message on the Display Screen requests you to open the Ink Tank Cover.
Important
870
Used for reference when packing the printer
Used to pack the printer
Used to draw in ink
).
If the Tab Selection screen is not displayed, press the Menu button.
•
If consumables must be replaced, the message "Consumables must be replaced. Call for service." is shown on
the Display Screen and preparation is not possible. If this message is displayed, press the OK button and contact
your Canon dealer for assistance.
→P.538
→P.560
→P.854
iPF6400
User's Guide