Canon imagePROGRAF iPF6400 User Manual page 935

iPF6400
*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Memory
Memory
Interface
Hi-Speed USB
Gigabit Ethernet
Ink
For information on the ink the printer supports, see "Ink Tanks."
Paper
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See Paper Reference
Guide .)
For information on the paper sizes the printer supports, see "Paper Sizes."
Paper width
Minimum paper length
Maximum printable
length ( *1 )
Thickness
Roll maximum outer diameter
Supported paper core inner diameter
Print area
*1: Varies depending on the operating system or application.
User's Guide
Format
Mode
Connector
Format
Specification
Protocols
Rolls
Sheets Top Paper Feed Slot
Front Paper Feed Slot
Rolls
Sheets Top Paper Feed Slot
Front Paper Feed Slot
Rolls
Sheets Top Paper Feed Slot
Front Paper Feed Slot
Rolls
Sheets Top Paper Feed Slot
Front Paper Feed Slot
For details, see "Print Area."
→P.936
384 MB
Internal port
Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Series B (4-pin)
Internal port
IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3ab 1000Base-T/Auto-Negotiation,
IEEE 802.3x Full Duplex
IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP (Canon-MIB compatible),
HTTP, TCP/IP (IPv4/IPv6), AppleTalk
→P.836
→P.524
203–610 mm (8.0–24.0 in)
203–610 mm (8.0–24.0 in)
250–610 mm (9.9–24.0 in)
203 mm (8.0 in)
279 mm (11.0 in)
350 mm (13.8 in)
18 m (19.7 yd)
1,600 mm (63.0 in)
914 mm (36.0 in)
0.07–0.8 mm (0.0028–0.031 in)
0.07–0.8 mm (0.0028–0.031 in)
0.5–1.5 mm (0.020–0.059 in)
150 mm (6 in) or shorter
2 inches / 3 inches
Specifications
935