Page 3
Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd. reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation.
Page 4
HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will...
Contents Getting to Know Your CPE ......................1 Preparing for Installation ........................ 4 Logging in to the Web-Based Utility ..................... 6 Troubleshooting ..........................7 Specifications ..........................9 Warnings and Precautions ......................10...
Thank you for purchasing WiMAX CPE! Getting to Know Your CPE The supported functions and actual appearance of the CPE may vary with the product you purchase. The following pictures are provided for illustration purpose only. Front Panel...
Page 8
Indicator Status Description WiMAX The indicators indicate the signal strength of the WiMAX network. When all the indicators are on, it indicates that the signal strength is at the highest level. Blink The biggest bar of the indicator is blinking steadily when ...
Rear Panel Interface Description POWER The interface is used to connect to the output interface of the power adapter. The interface is used to connect a telephone line.
Interface Description The interface is used to connect the CPE to the computer. RESET Press and hold the button for one to eight seconds to restart the CPE. Press and hold the button for over eight seconds to restore the default settings of the CPE.
Connecting the Cables NOTE: During lightning storms, power off the CPE. Use the cables and the power adapter provided with the product. The cable connection figure is provided for illustration purpose. You can connect the CPEs to the CPE according to the actual requirements.
Logging in to the Web-Based Utility Take the Windows XP operating system and the Internet Explorer 6.0 as examples. Ensure that the CPE is connected to the PC. To log in to the Web-based utility, do as follows: Set the IP address of the PC and ensure that the IP address of the PC is in the same network segment as that of the CPE.
Troubleshooting The power indicator is not on. Ensure that the CPE is powered on. Ensure that the power adapter is compatible with the CPE. You cannot make calls. Ensure that the telephone is working normally and the telephone line is connected ...
Page 14
If the problem persists, contact the local service provider. The CPE or the power adapter overheats. The CPE may get heated after being used for a long time. Therefore, power off the CPE when you do not use the CPE. Place the CPE in a well-ventilated place and do not expose the CPE to direct sunlight.
Specifications WiMAX Parameters Standard IEEE 802.16e-2005 Frequency 2.496–2.69 GHz Interface One Fast Ethernet (FE) interface One Plain Old Telephone Service (POTS) interface Other Parameters Power adapter input 100–240 V AC Power consumption 10 W Power supply to CPE 12 V, 1 A Operating temperature 0˚C to 40˚C (32˚F to 104˚F) Operating humidity...
Warnings and Precautions To use the CPE properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the CPE described in this section includes the CPE and its accessories. Basic Requirements During storage, transportation, and operation of the CPE, keep it dry and prevent it from ...
Page 17
Do not place any object (such as a candle or a water container) on the CPE. If any foreign object or liquid enters the CPE, stop using the CPE immediately, power it off, remove all the cables connected to it, and then contact an authorized service center. During thunderstorms, power off the CPE, and then remove all the cables connected to ...
Page 18
Do not use the power adapter if its cable is damaged. Otherwise, electric shocks or fires may occur. Ensure that the power adapter meets the specifications indicated on the CPE nameplate. Ensure that the power adapter meets the requirements of Clause 2.5 in ...
Page 19
This CPE should be installed and operated with a minimum distance of 20 cm between the antenna and all persons. Български: С настоящето Huawei Technologies Co., Ltd. декларира, че този уред съответства на основните изисквания и другите разпоредби на Директива...
Page 20
EC/5/1999 Irányelv összes lényeges követelményének és vonatkozó előírásának. Gaeilge: Fograí onn Huawei Technologies Co., Ltd. leis seo go bhfuil an fheiste seo i gcomhlí onadh leis na fí or-riachtanais agus na forálacha eile maidir le Treoir 1999/5/AE.
Page 21
dispositivo è conforme ai requisiti essenziali e alle altre disposizioni applicabili della Direttiva 1999/5/CE. Latviski: Ar šo Huawei Technologies Co., Ltd. paziņo, ka šī ierīce atbilst Direktīvas 1999/5/EC pamatprasībām un piemērojamajiem nosacījumiem. Lietuviškai: Šiuo Huawei Technologies Co., Ltd. praneša, kad šis įtaisas atitinka ...
Page 22
Notice: Observe the national local regulations in the location where the CPE is to be used. This CPE may be restricted for use in some or all member states of the European Union (EU). Notice: This CPE may be operated in all member states of the EU. ...
Page 24
Huawei Technologies Co., Ltd. Huawei Industrial Base, Bantian, Longgang Shenzhen 518129 People’s Republic of China www.huawei.com...