Hitachi N 3804AB2 Instruction And Safety Manual page 19

(2) Continuous operation (Push lever fire)
1 Pull the trigger with the Stapler off the
workpiece.
2 Depress the push lever against the
workpiece to drive a staple.
3 Move the Stapler along the workpiece
with a bouncing motion.
Each depression of the push lever will
drive a staple.
As soon as the desired number of staples
have been driven, remove finger from the
trigger.
Keep your finger off the trigger except during fastening
operation, beacuse serious injury could result if the push lever
accidentally contacts you or others in work area.
Keep hands and body away from the discharge area. The
Stapler with contact trip mechanism may bounce from the
recoil of driving a fastener and unwanted subsequent fastener
may be driven, possibly causing injury.
Some types of loaded staples can spark out of the muzzle
during a nail driving operation. Exercise caution!
THE OPTIONAL SEQUENTIAL TRIP MECHANISM (SINGLE SHOT PARTS) is for use where
precision fastener placement is desired and must be operated in accordance with the
following "Method of Operation".
You must first depress the push lever (upward position) where you want to drive a
staple and then pull the trigger. After the each staple is driven, completely release the
trigger and lift the tool off the work surface. An OPTIONAL SEQUENTIAL TRIP
MECHANISM may reduce the possibility of bodily injury to you or others in the work
area. This is because it is less likely to drive an unwanted staple if you keep the trigger
pulled and accidentally bump the push lever against yourself or others. An OPTIONAL
SEQUENTIAL TRIP MECHANISM may also reduce the speed of operation compared to
the standard contact trip mechanism.
NOTE:
Both STANDARD CONTACT TRIP MECHANISM and OPTIONAL SEQUENTIAL TRIP
MECHANISM are safe if used as described above and accroding to all warnings and
instructions.
Always handle staples and package carefully. If staples are dropped, collating bond
may be broken.
Push Lever
Previously pull
the trigger
WARNING
English
3
1
19