Maintenance Maintenance And Inspection - Hitachi N 3804AB2 Instruction And Safety Manual

English
NOTE:
The information contained in this Manual is designed to assist you in the safe
maintenance of the Stapler.
Some illustrations in this Manual may show details or attachments that differ from
those on your own Stapler.
MAINTENANCE AND INSPECTION
Read section titled "SAFETY" (pages 4 – 8).
Disconnect air hose and remove all staples from Stapler when:
1) doing maintenance and inspection; and
2) clearing a jam.
1. Clearing a jam
Remove a jammed staple in the following order:
1 DISCONNECT AIR HOSE.
2 Remove all staples.
3 Release the lock lever and open the
blade guide.
4 Remove the jammed staple with a
slotted-head screwdriver.
5 Close the blade guide and latch.
6 In case of frequent jam, contact a
Hitachi authorized service center.
22
MAINTENANCE
WARNING
3
Blade Guide
1
Lock
Disconnect
Lever
air hose
4