KitchenAid 30" (76.2 CM) COMMERCIAL STYLE DUAL FUEL CONVECTION RANGE Installation Instructions Manual page 15

30" (76.2 cm), 36" (91.4 cm) and 48" (121.9 cm) commercial style dual fuel convection range
Hide thumbs Also See for 30" (76.2 CM) COMMERCIAL STYLE DUAL FUEL CONVECTION RANGE:
Table of Contents

Advertisement

Available languages

Available languages

3. Attach filter to the mounting ring.
Mounting ring and screw
1½" (3.8 cm) clearance
Connect to Home Water Supply
1. Make connection to the cold water supply line.
A leak-tight connection to the ¼" flexible codes approved
water supply line must be provided.
Check local codes for type of connection required.
Flexible codes approved water supply line must be cut with a
tubing cutter so the ends are concentric and without burrs.
NOTE: It is recommended that the cold water line be soft water.
Connect to Water Filter Inlet (yellow)
NOTE: Use the quick connect stem and/or elbow adapter fittings
in the combination needed for your installation configuration.
1. Attach the supplied
" to
connect adapter fitting to the yellow water filter inlet
connection by pushing the quick connect fitting past the
O-ring until you hit the backstop.
A
A. Quick connect elbow adapter fitting
B. Quick connect stem adapter fitting
2. Connect the flexible codes approved water supply line (not
provided) from the home cold water supply pipe to the quick
connect adapter fitting you just installed on the filter inlet
(yellow) side of the water filter.
3. Pull tube to ensure it is secured.
A. ¼" water supply tubing
B. O-ring
C. Backstop
" stem or
" to
" elbow quick
B
If you need to release tubing:
Push in collet to release tubing. With collet held in, pull tubing
straight out.
A
A. Collet
Connect to Water Filter Outlet (blue)
1. Attach the supplied
" to
connect adapter fitting to the blue water filter outlet
connection by pushing the quick connect fitting past the
O-ring until you hit the backstop.
2. Connect another piece of flexible codes approved water
supply line to the quick connect adapter fitting you just
installed on the filter outlet (blue) side of the water filter.
3. Pull tube to ensure it is secured.
Sink
Water
supply
connection
Water supply tubing
to cold water supply
Shutoff
valve
4. Route flexible codes approved water supply line through
undersink cabinet and oven cabinet cutout.
" stem or
" to
" elbow quick
Water supply tubing to range
Yellow
WATER
IN
WATER
Filter
Blue
OUT
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents