Installation Hint for TC9217MM, TC9220MM, and TC9227MM Series Monitor Mounts, RE: Step 4. For proper center of gravity alignment of Bosch monitors on the bottom support tray, a recommended starting point is to use the third (3rd) square hole from the front edge of the tray to mount the vertical support arm using pin E.
Installation and Assembly BOSCH TC9217MM-W, TC9220MM-W, Models: BOSCH Monitor Wall Mounts TC9227MM-W Before you start make sure all parts IMPORTANT! Read entire This product is intended for use with UL shown (see parts list, page 9) are instruction sheet before you Listed products and must be installed by a qualified professional installer.
Page 4
Attach support tray (A) to vertical support arms (P) as shown. Note: Choose the square hole which aligns closest with the center of gravity mark on the TV (as determined in step 1). Attach anti-rollout hooks (R) as shown using M6 screws (Z) and retainer bars (Y).
Page 5
For Wood Stud Walls drill three 5/32" (4 mm) dia. holes to a minimum depth of 2.5" (64 mm) into stud center. Attach wall arm (W) using three #14 x 2.5" (6 mm x 65 mm) wood screws (V). WARNING •...
Page 7
Note: Slots in corners of top clamps (Q) and corners of vertical support arms (P) allow for the installation of safety belt (model ACC 666, sold separately). If using this belt, install it now. DETAIL 1 DETAIL 2 Position TV onto support tray (A). Position anti-rollout hooks (R) against front edge of TV. WARNING •...
Page 8
When attaching the horizontal support (S) to wall arm or ceiling plate, carefully thread retaining collar (O) onto end of flush mount (T) tube (or extension column). Tighten at least DETAIL 3 four complete turns ending with one of the small threaded (BOTTOM VIEW) holes aligned with slot in the end of flush mount tube (T) (or extension column).
Parts List TC9217MM-W TC9220MM-W TC9227MM-W Description Qty. Part # Part # Part # A1 left end support tray 128-1023 128-1026 128-1026 A2 right end support tray 128-1024 128-1027 128-1027 A3 center support tray 128-1128 128-1134 128-1135 5/16 - 18 x 1/2" carriage bolt 520-9207 520-9207 520-9207...
Page 10
GENERAL WALL MOUNT KIT SPECIFICATIONS Mount TV/Monitor Product BOSCH rated when attached to... Support concrete, Model Tray wood cinder block Number stud Depth (D) Screen Size or brick 10" 13" - 17" 125 lb 150 lb TC9217MM-W (57 kg) (65 kg)