Huawei iFox HiLink 852 User Manual

Usb stick

Advertisement

Quick Links

Thank you for choosing iFox HiLink 852 you can access
a wireless network at high speed.
Note:
This manual describes the appearance of the USB Stick, as well as the procedures for
preparation, and connection steps. For details about how to set the management
parameters, see help information on the web management page.
Getting to Know Your iFox HiLink 852
The following figure shows the appearance of the USB Stick. It is provided only for your
reference. The actual product may be different.
1

Advertisement

Table of Contents
loading

Summary of Contents for Huawei iFox HiLink 852

  • Page 1 Thank you for choosing iFox HiLink 852 you can access a wireless network at high speed. Note: This manual describes the appearance of the USB Stick, as well as the procedures for preparation, and connection steps. For details about how to set the management parameters, see help information on the web management page.
  • Page 2: Usb Connector

     USB Connector It connects the USB Stick to a PC.  Strap Hole You can tie the cap and the USB Stick together by threading a strap through the strap holes, so that the cap will not be easily lost.
  • Page 3  Indicator It indicates the status of the USB Stick. Green, blinking twice every 3s: The USB Stick is powered on.  Green, blinking once every 3s: The USB Stick is registering with a 2G network.  Blue, blinking once every 3s: The USB Stick is registering with a 3G/3G+ network. ...
  • Page 4: Microsd Card Slot

    Card Slot It holds a microSD card. Getting Your iFox HiLink 852 Ready 1. Slide the front cover to remove it from the USB Stick. 2. Insert the SIM/USIM card and the microSD card into the corresponding card slots, as shown in the following figure.
  • Page 5 Note: The microSD card is an optional accessory. If it is not provided in the package, you can  buy one yourself. Ensure that the beveled edge of the SIM/USIM card is properly aligned with that of the  SIM/USIM card slot and the microSD card is inserted according to the direction as labeled on the microSD card slot.
  • Page 6: Connecting To A Network

    Using Your iFox HiLink 852 The procedure for installing the management program depends on your computer's operating system. The following sections are based on Windows XP. Connecting to a Network 1. Insert the USB Stick into one of your computer's USB ports.
  • Page 7: Disconnecting From A Network

    2. When the installation is complete, the USB Stick's web management page is displayed and the USB Stick connects to the network automatically. The USB Stick's web management page will be automatically displayed every time the USB Stick is inserted into the computer.
  • Page 8: Viewing Service Information

    Stick from your computer to eliminate unwanted data traffic. Viewing Service Information Visit http://192.168.1.1 to view your service information. Version: V100R001_01 Part Number: 31010KGY...

Table of Contents