Installing The Hard-Drive/Ssd Backplane - Dell PowerEdge M820 Systems Owner's Manual

Figure 10. Removing and Installing the Hard-Drive/SSD Backplane (Half-Length)
1. guide pins (3)
2. backplane connector
3. hard-drive/SSD backplane

Installing The Hard-Drive/SSD Backplane

1. Remove the blade from the enclosure.
2. Open the blade.
3. Align the guides on the hard-drive/SSD backplane with the guide pins on the system board.
4. Press down the backplane until the connectors on the backplane and the system board are fully engaged.
5. Install the hard drives/SSDs in their original locations.
6. Close the blade.
7. Install the blade in the enclosure.
36
4. hard-drive/SSD connectors (2)
5. guides (3)