Antenna Connector; Usb Port Connector; Reset Button; Dc Power Connector - D-Link DP-G310 User Manual

network.

Antenna Connector

Connect the Wireless LAN antenna to the Antenna Connector to have better
signaling of Wireless.

USB Port Connector

The rear panel of the print server features the USB port connector. Plug this
connector directly into the USB port on your network printer via a USB cable.

Reset Button

Press and release this button to reset the Print Server; or press and hold this button
for three seconds until the USB LED on the front panel light up and then release the
button, the Print Server will resume the factory default settings.

DC Power Connector

The DC power input connector is located on the Print Server's rear panel and is
labeled DC 5V.
5