Clock Functions - AEG BS9304001 User Manual

14 www.aeg.com

7. CLOCK FUNCTIONS

Symbol
If you set the time for a clock function,
the time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90 % of the set time.
The appliance uses the residual
heat to continue the cooking
procedure until the time ends.
The residual heat can stay in the
appliance from 3 to 20 minutes.
Setting the clock functions
1. Set a heating function.
2.
Press
display shows the necessary clock
function and the related symbol.
3. Use the shuttle to set the necessary
time. Press OK to confirm. When the
time ends, an acoustic signal
sounds. The appliance deactivates.
The display shows a message.
4. Press a sensor field to stop the sig-
nal.
Useful information:
• With Duration and End Time , you
must set the heating function and the
temperature first. Then you can set the
clock function. The appliance deacti-
vates automatically.
• You can use Duration and End Time at
the same time if you want to automati-
cally activate and deactivate the appli-
ance at a given time later.
• When you use the Core Temperature
Sensor (if applicable), the Duration
Function
To set a countdown (max. 2 h 30 min). This func-
tion has no effect on the operation of the appli-
ance. You can also activate it when the appliance
Minute Minder
is deactivated. Press
Use the shuttle to set the minutes and OK to start.
To set the length of an operation (max. 23 h 59
Duration
min).
To set the switch-off time for a heating function
End Time
(max. 23 h 59 min).
again and again until the
Description
to activate the function.
and End Time functions do not oper-
ate.
7.1 Heat + Hold
The Heat + Hold function keeps pre-
pared food warm at 80 °C for 30 mi-
nutes. It activates after the baking or
roasting procedure ends.
• You can activate or deactivate the
function in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more than 80
°C.
– The function Duration is set.
Activating the function
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4.
Press again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function stays on if you
change the heating functions.
7.2 Extra Time
The Extra Time makes the heating func-
tion continue after the Duration ends.
• Applicable for all heating functions
with Duration or Weight Automatic .
• Not applicable for heating functions
with the core temperature sensor.