Do not put cutlery or saucepan lids on the • Be careful when you connect the appliance to the near cooking surface. Cookware and its contents can tip sockets. Do not let the electricity bonds touch the ap- over. There is a risk of burns. www.zanussi.com...
Page 3
Disposal of the appliance • Before installation, make sure that the local supply • To prevent the risk of physical injury or damage conditions (gas type and pressure) agree with the ad- – Disconnect the appliance from the power supply. www.zanussi.com...
If it is fitted below 400 mm a space of 50 mm must any strain on the hob. be allowed from the edges of the hob. If you use flexible metal pipes make sure that they agree to ISO 10380 and ISO 10807 standards. Be careful they do www.zanussi.com...
Page 5
• You must have the correct isolation devices: line pro- tecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. • The connection cable parts must not be heated to a temperature above 90°C. www.zanussi.com...
Page 6
Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code: 10 mm 11 mm Green and yellow - Earth 3 mm 11 mm Blue - Neutral www.zanussi.com...
30 mm min 20 mm 60 mm (max 150 mm) a) Removable panel Product description Cooking surface layout Cooktop Semi-rapid burner Triple Crown burner Auxiliary burner Control knobs www.zanussi.com...
1 minute. Important! In the absence of electricity you can ignite the burner without electrical device; in this case approach the burner with a flame, push the relevant knob down and turn it counter-clockwise to maximum gas release position. www.zanussi.com...
Warning! Deactivate the appliance and let it cool Warning! For safety reasons, do not clean the down before you clean it. Disconnect the appliance appliance with steam cleaners or high-pressure from the electrical supply before you do cleaning or cleaners. maintenance work. www.zanussi.com...
• Control the fuse. If the fuse is re- leased more than one time, refer to a qualified electrician. • Burner cap and crown are placed • Make sure that the burner cap and uneven crown are in correct positions. www.zanussi.com...
These data are necessary to help you quickly and correct- ly. These data are available on the supplied rating plate. • Model description ....Technical data Hob dimensions Hob recess dimensions Width: 594 mm Width: 560 mm Length: 510 mm Length: 480 mm www.zanussi.com...
>PE<,>PS<, etc. Discard the health, which could otherwise be caused by inappropriate packaging materials as household waste at the waste dis- waste handling of this product. For more detailed posal facilities in your municipality. www.zanussi.com...