Hitachi DV-S522U Instruction Manual page 7

Inserting batteries
1
NOTE:
Remove the batteries if the remote control is not to be used for a
month or more. Batteries left in the unit may leak and cause
damage.
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE
RECYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE
WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL
COUNTY SOLID WASTE AUTHORITY.
Remote control range
Remote sensor
POWER/STANDBY
PHONES
Within approx. 20 feet
(7 meters)
To set the remote control code for the Hitachi TV
This remote control can operate the basic function of TVs.
Follow the steps below to enter the remote control code for the
Hitachi TV.
1. While holding down [TV POWER], enter the 2-digit code [0]
and [2], then release [TV POWER].
• The remote control is now set to operate the Hitachi TV.
IMPORTANT NOTE:
If the batteries in the remote control are changed, the code
settings for the TV must be re-entered.
2
Two "AA" batteries
(supplied)
FM MODE VOLUME
q OPEN/
a k n
CLOSE
f /TUNE - e /TUNE + d /PRESET c /MEMO
SURROUND BASS SOUND SOURCE
30 30
LAST MEMO REPEAT
SEARCH MODE
DISPLAY RETURN PROG
TV POWER TV CH TV VOL
TV/VIDEO TV CH TV VOL
SHIFT
CLEAR
ENTER
TRIM
REV FWD
SLOW SLOW
To set the remote control code for the other TVs
This remote control can operate the basic functions of TVs made
by the manufacturers listed below.
To enter the remote control code for your brand of TV, follow the
steps below.
1. In the chart below, find the code corresponding to your brand
of TV .
2. While holding down [TV POWER], enter the 2-digit code
using the number buttons [0 - 9], then release [TV POWER].
• The remote control is now set to operate your TV.
TV brands
ADMIRAL
EMERSON
FISHER
GE
GOLD STAR
JVC
MAGNAVOX
MATSUSHITA
MITSUBISHI
PANASONIC
QUASAR
RCA
SAMSUNG
SANYO
SHARP
SONY
TECHNOL ACE
TOSHIBA
ZENITH
Notes:
• Only remote-controlled TVs can be operated using this remote
control. (Refer to your TV instruction manual for more details.)
• There may be some older TV models that cannot be operated
with this remote control. If this is the case, use the original
remote control supplied with the TV.
IMPORTANT NOTE:
If the batteries in the remote control are changed, the code
settings for the TV must be re-entered.
Write your code number below for future reference.
TV:
Notes on using the Joy-stick
The Joy-stick has five functions depending on the direction it is
moved.
Press straight down: ENTER
Tilt towards the front: 4
Tilt towards the right: a
Tilt towards the back: 5
Tilt towards the left: b
Note: Control the stick using your thumb.
-E6-
Code
05, 10, 13
17
03
07
01
15
08
12, 18
14
12, 18
12, 18
06
16
03
00, 13
11
05
04
09, 10
ENTER