Back to Contents Page
Palm Rest
Dell™ Latitude™ D500 Service Manual
CAUTION:
Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1. Follow the instructions in
"Preparing to Work Inside the
2. Remove the keyboard.
NOTICE:
You must remove the display assembly before you remove the palm rest; the display hinges pass through the back of the palm rest.
3. Remove the
display
assembly.
4. Remove the three M2 x 3-mm screws labeled "circle P" from the top of the palm rest.
1
M2 x 3-mm screws (3)
2
top of the palm rest
5. Disconnect the touch pad connector from the system board.
Computer."