Palmrest
Removing the palm rest
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
2230 solid-state
4. Remove the
2280 solid-state
5. Remove the
rear
I/O-cover.
6. Remove the battery.
7. Remove the
display
assembly.
8. Remove the
coin-cell
9. Remove the
keyboard-controller
10. Remove the
left
I/O-board.
11. Remove the
right
I/O-board.
12. Remove the speakers.
13. Remove the
system
board.
14. Remove the touchpad.
15. Remove the
power-adapter
16. Remove the
power-button
17. Remove the keyboard.
Steps
After performing the pre-requisites, you are left with the palm rest.
Installing the palm rest
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
58
Before working inside your
drive. (if applicable)
drive. (if applicable)
battery.
board.
port.
assembly.
computer.