Table of Contents
Advertisement
Next steps
1. Install the
system
board.
2. Install the
right
I/O-board.
3. Install the battery.
4. Install the
rear
I/O-cover.
5. Install the
2230 solid-state
6. Install the
2280 solid-state
7. Install the
base
cover.
8. Follow the procedure in
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
2230 solid-state
4. Remove the
2280 solid-state
5. Remove the
rear
I/O-cover.
6. Remove the battery.
7. Remove the
right
I/O-board.(only applicable when the touchpad cable needs to be removed)
8. Remove the
system
board. (only applicable when the touchpad cable needs to be removed)
About this task
The following image indicates the location of the touchpad and provides a visual representation of the removal procedure.
Steps
1. Open the latch and disconnect the keyboard-controller board-cable from keyboard-controller board.
2. Lift the keyboard-controller board-cable off the palm-rest assembly.
3. Open the latch and disconnect the keyboard cable from the keyboard-controller board.
48
drive. (if applicable)
drive. (if applicable)
After working inside your
Before working inside your
drive. (if applicable)
drive. (if applicable)
computer.
computer.
Advertisement
Table of Contents
