Motorola DCT5100 User Manual page 32

Connecting a Stereo TV, VCR, and DVD
This cable configuration may be used for a mono or stereo VCR,
because the VCR audio and video jacks are not used.
If your TV supports multiple sets of video and audio inputs (such as
VID1, VID2, etc.), see the diagram Connecting a Stereo TV and Stereo
VCR to connect your DCT5100, VCR and TV. When you have completed
those connections, refer to the diagram illustrated here to connect your
DVD to your TV.
1
Connect an RF coaxial cable to the cable wall outlet and the
IN
connector on the DCT5100.
2
Connect an RF coaxial cable to the
DCT5100 and the
3
Connect an RF coaxial cable to the
CABLE
and the
4
Connect a stereo audio cable to the
connectors on the stereo TV and the
connectors on the DVD.
5
Connect a video cable to the
TV and the
Connect an S-video cable to the
stereo TV and the
The video connection method does not support high definition video. For
more information, see "Connecting your DCT5100 to an HDTV – Video
Only" on page 16.
CABLE ANTENNA IN
/
ANTENNA IN
/ connector on the stereo TV.
VIDEO OUT VIDEO
VIDEO OUT S
DCT5100 User Guide
TO TV VCR
/
connector on the VCR.
TO TV
connector on the VCR
INPUT AUDIO LEFT
AUDIO OUT ANALOG R
INPUT VIDEO
connector on the stereo
connector on the DVD.
Or
INPUT S VIDEO
-
VIDEO
- connector on the DVD.
25
CABLE
connector on the
RIGHT
and
L
and
connector on the