Error Messages In The Status Monitor - Brother ADS-2000 User Manual

Error Messages in the Status Monitor

Error Messages in the Status Monitor
The Status Monitor will report problems with the machine. Take the proper action by referring to the following table.
If you want to turn the status monitor on, see
Monitor the Status of the Machine from Your Computer
Error message
Ready
Sleep
Offline
Out of Memory
Replace Pad
Replace Roller
Replace Parts
Cover is Open
Scan Unable
Unusable Device
file:///C|/Documents%20and%20Settings/mcampbell.AM/My%20Documents/ADS2000solutions/chapter7_2.html[3/11/2013 10:23:48 AM]
Monitor the Status of the Machine from Your Computer (Windows
Cause
—
The machine is idle and the amount of
time specified by the Sleep Time setting
has elapsed.
The machine is not connected to the
computer.
The machine's memory is full.
The Separation Pad has been used over
50,000 times.
The Pick-up Roller has been used over
50,000 times.
Both the Separation Pad and the Pick-up
Roller have been used over 50,000
times.
Front Cover is open.
The machine is warming up.
An unusable device is inserted in the
USB port.
(Macintosh).
Action
The machine is ready to scan.
Do one of the following:
• Press any key.
• Open the Top Cover.
• Load your document.
Connect the machine to the computer and turn on
the machine by opening the Top Cover.
Do one of the following:
• Press any key.
• Turn the machine off and then on by
unplugging the machine from the AC power
outlet and then plugging the machine in again.
Replace the Separation Pad with a new one.
Scanning errors may occur if you do not replace
the part. See
Replace the Pick-up Roller with a new one.
Scanning errors may occur if you do not replace
the part. See
Replace the Separation Pad and the Pick-up
Roller with new ones. Scanning errors may occur
if you do not replace the parts. See
Separation Pad
Do one of the following:
• If the error occurred while the machine was in
standby mode, see Front Cover is Open in
Indications.
• If the error occurred while scanning, see Front
Cover is Open in
Correct the error. See
Service Call
Disconnect the device. Turn the machine off and
then on by unplugging the machine from the AC
power outlet and then plugging the machine in
Replace the Separation
Replace the Pick-up Roller.
Replace the
and Replace the Pick-up
LED Indications.
LED Indications
Indications.
®
) or
Pad.
Roller.
LED
and