Advertisement
GP-IB Adapter
GP-IB Adapter
GP-620
Provides the listener/talker function which
controls all functions including the voltage
and current settings and reads the output
voltage and current values of the
KENWOOD PWR/PWR-P/PAR Series
power supplies through the GP-IB bus.
A single adapter can control up to 4 PWR
or PWR-P Series supplies or up to 10 PAR
Series supplies.
The interface function conforms to IEEE-
488-1978 and the listener/talker function,
SRQ function and ID recognition allows you
to create a system with excellent safety.
GP-620 Specifications
GP-IB
Electrical specifications
Conforms to IEEE488-1978
Conforms to IEEE488-1978
Mechanical specifications
SH1, AH1, TE0, L3, LE0, T6, SR1, RL1,
Interface functions
PP0, DC1, DT1, C0
Addresses 0 to 30 can be set using an
Address setting
address switch.
Listen-only mode
Can be set with the L-ONLY switch.
Can be set with the EOI/CR.LF switch.
Transmission delimiter selection
Remote/local function
Can be set with the Local switch.
Detection of the status of all outputs and
Talker function
settings of the controlled power supplies.
Listener function
Detection of the status of all outputs of
the controlled power supplies.
Service request function
Notification of change in the CC/CV
status of the controlled power supplies,
notification of abnormal voltage
occurrence in the controlled power
supplies.
PWR bus (REMOTE connector)
Data transfer rate
9600 bits/sec,
Start bit
Data code configuration
bit
Even parity
Parity system
1.5 meters
Maximum control code length
Number of controllable power
4 (PWR/PWR-P), 10 (PAR)
supplies
Signaling format
Single current NRZ (0: +5 V, 1: 0 V)
100/120/220/240 V AC
Power supply
internally switchable. 50/60 Hz.
Power consumption
Approx. 5 W
68(W) 147(H) 251(D) mm
Dimensions
Maximum dimensions
73(W) 161.5(H) 283(D) mm
Approx. 1.8 kg
Weight
Instruction Manual
Accessory
5%
1 bit, data bit
7 bits, parity
1 bit, stop bit
1 bit
10% (250 V max.)
1
89
REGULATED DC POWER SUPPLIES
PAR SERIES
Advertisement
