Panasonic WJ-ND300 Setup Instructions page 32

Network disk recorder
Hide thumbs Also See for WJ-ND300:
Table of Contents

Advertisement

Setup items
I REC Type
Select "QUICK" or "ADVANCED" for validation of the recording settings.
QUICK: The recording settings set on the setup menu (Quick) will be validated when recording.
ADVANCED: The recording settings set on the setup menu (Advanced) will be validated when recording.
Note:
• When "QUICK" is selected, the setup menu (Quick) will be displayed by clicking the [Setup] tab. When
"ADVANCED" is selected, the setup menu (Advanced) will be displayed by clicking the [Setup] tab.
• When "QUICK" is selected, the following setup items of "Schedule" (Advanced) will not function. When it is nec-
essary to function the following items, select "ADVANCED".
Submenu
Time Table
Program
Special Days
* To perform the schedule recording, perform the settings for "Time Table" and "Program".
[Measurement] Button
It is possible to start calculation of maximum value of
recording rate/transmission rate (ips) that can be set for
"Live video", "Manual recording" and "Event recording"
by clicking this button.
Recording will stop for around 90 seconds due to the
calculation.
I LIVE VIDEO
Set the transmission rate of live images from cameras.
The following are available for the transmission rate.
OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/
5 ips/10 ips/15 ips
I Manual REC Operation
Perform the recording rate for manual recording.
The following are available for "Recording Rate".
OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/
5 ips/10 ips/15 ips
32
Setup items
FTP SEND BY PERIODIC TIMER
ERROR REPORT MAIL
FTP Alarm Sending
Alarm Message
Individual Alarm Notification
Alarm Message
Program 1 - 4
Status
Disabled
Disabled
Disabled
Functions normally (Fixed to ON.)
Disabled
Disabled
The settings performed on the setup menu
(Advanced) will not be validated.
The settings performed on the setup menu
(Quick) will be validated. *
Disabled
I EVENT REC
Set the recording rate, recording duration and the event
action mode when an event (site alarm, terminal alarm,
command alarm) occurs.
The following are available for "Recording Rate".
OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/
5 ips/10 ips/15 ips
The following are available for "Time" (recording dura-
tion).
1 s - 10 s (in 1 second intervals)/20 s/30 s/1 min -
10 min (in 1 minute intervals)/20 min/30 min/40 min/
50 min/ 60 min
MANUAL: Recording will be performed while alarm sig-
nals (camera site alarm, terminal alarm, command
alarm) are being supplied.

Advertisement

Table of Contents
loading

Table of Contents