Panasonic WJ-ND300 Setup Instructions page 70

Network disk recorder
Hide thumbs Also See for WJ-ND300:
Table of Contents

Advertisement

I File Name
Perform the settings for the rules about the file name to
be sent.
Select whether to "Use the time and date as a file
name" or "Use a number as a file name".
I Interval
Enter a number for transmission interval. Enter a num-
ber (1-1440) for transmission interval, and select
whether it will be "s" (seconds) or "m" (minutes) for the
interval unit.
I Channel to Send
Select a camera channel from which images will be sent
periodically. Images from the checked camera channel
will be sent to the FTP server.
FTP Send by Alarm
Perform the following settings to send images recorded
in the location where an alarm occurred. Perform the
settings to determine whether or not to send images
recorded in the location where an alarm occurred to the
FTP server using the timetable (page 55).
I Server Directory
Enter a directory of the server. Enter up to 255 alphanu-
meric characters. The available characters are the char-
acters listed below except (&*:<>?\ | ~ blank (space)).
Note:
The following alphanumeric characters can be
entered.
A B C D E F G H I J K L M N O P Q R S T U V W X
Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1
2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * + , - . /: ; < = > ? @ [
\ ] ^ _ `{ | } ~
I Duration-Pre
Select the duration of the images recorded by pre-event
recording to be transmitted from the following. OFF/1 s -
10 s (in 1-second interval)
Important:
Images recorded by pre-event recording will not be
transmitted when pre-event recording is not to be
performed. Perform pre-event recording to transmit
images recorded by pre-event recording. Refer to
page 53 for further information about pre-event
recording settings.
70
I Duration-Post
Select the duration of the images recorded by post-
event recording to be transmitted from the following.
OFF/1 s - 10 s (in 1-second interval)
Note:
It is possible to transmit images recorded by an
emergency recording to an FTP server. Recorded
images to be transmitted are as follows:
• Camera channel: Camera channel from which
images were recorded by an emergency recording
• Recording duration: For the duration selected for
"Duration-Post" on the "FTP Setup" menu from the
time when the emergency recording started
• Directory where recorded images are to be transmit-
ted: The directory designated for "Server Directory"
of "Ftp send by alarm" on the "FTP Setup" menu
I Alter Detect
Select ON or OFF to determine whether or not to attach
an alteration detection code to recorded images to be
transmitted using the viewer software when an alarm
occurs.

Advertisement

Table of Contents
loading

Table of Contents