Table of Contents
Advertisement
4
Get started
Get started
Insert the SIM card and battery
Important: Do not use a mini-UICC SIM card, also known as a micro-SIM card, a
micro-SIM card with an adapter, or a SIM card that has a mini-UICC cutout (see figure)
in this device. A micro SIM card is smaller than the standard SIM card. This device does
not support the use of micro-SIM cards and use of incompatible SIM cards may damage
the card or the device, and may corrupt data stored on the card.
The SIM card and its contacts can be easily damaged by scratches or bending, so be
careful when handling, inserting, or removing the card.
1
Place your finger in the recess at the bottom of the device, and carefully lift and
remove the back cover (1).
2
If the battery is inserted, lift the battery out (2).
3
Open the SIM card holder (3). Make sure the contact area is facing down, and insert
the SIM card (4). Close the holder.
4
Line up the contacts of the battery and the battery compartment, and insert the
battery (5). To replace the back cover, direct the top locking catches toward their
slots (6), and press down until the cover locks into place (7).
Advertisement
Table of Contents
