Advertisement
Example for use
Press the mode switch button and set the mode of your preferred treatment.
Quick tighten-up treatment (Required time: approximate 2 minutes)
Step 4 "COOL"
When you want to tighten your pores or cool down your skin before applying make up,
you can just use "COOL." After 10-second preparation for cooling, it only takes
approximate one minute and 50 seconds to tighten the pores of your skin. Press the
mode switch button to set to "COOL."
Quick treatment (Required time: approximate 3 minutes)
Step 2 "HOT MOISTURIZE"
When you do not have much time in the morning or when you need to go out suddenly,
you can just use "HOT MOISTURIZE." It only takes approximate three minutes to
moisturize your skin thoroughly. Press the mode switch button to set to
"HOT MOISTURIZE."
Tighten-up treatment (Required time: approximate 5 minutes)
Step 1 "HOT CLEANSING"
Step 4 "COOL"
When you want to remove fine residue remaining in pores and tighten the pores of your
skin, use "COOL" after using "HOT CLEANSING." This treatment cleanses and
tightens the pores of your skin. After the "HOT CLEANSING" mode is finished, press
the mode switch button to set to "COOL."
Moisturize treatment (Required time: approximate 6 minutes)
Step 1 "HOT CLEANSING"
Step 2 "HOT MOISTURIZE"
Before you go out or when you have more time, use "HOT MOISTURIZE" after using
"HOT CLEANSING." This treatment moisturizes the clean skin thoroughly.
Daily treatment (Basic mode) (Required time: approximate 8 minutes)
Step 1 "HOT CLEANSING"
Step 2 "HOT MOISTURIZE"
Step 4 "COOL"
Standard daily moisturize treatment
After using "HOT CLEANSING," moisturize the clean skin in "HOT MOISTURIZE and
tighten the pores of your skin by cooling effect in "COOL." After the "HOT MOISTURIZE"
mode is finished, press the mode switch button to set to "COOL."
Recommended full treatment (Required time: approximate 11 minutes)
Step 1 "HOT CLEANSING"
Step 2 "HOT MOISTURIZE"
Step 3 "HOT MASK"
Step 4 "COOL"
Care for your skin once or twice a week by using all modes.
Fine vibrations in "HOT MASK" mode and gentle switching of the electrode will enhance
the moisturizing effect of lotion or mask. The cooling effect of "COOL" mode will tighten
the pores of your skin.
How to use
Make sure to use only 100-240V AC for power supply and use the included power
adaptor (this device is not rechargeable).
After the power switch is switched to "On," the heating head warms slowly.
Advertisement
