Traps Settings - Dell PowerEdge C410x Hardware Owner's Manual

Traps Settings

In the Trap Settings, user can set the IPv4 and Ipv6 Destination List.
IPv6 and IPv4 are two completely separate protocols. IPv6 is not backwards compatible with IPv4, and
IPv4 hosts and routers will not be able to deal directly with IPv6 traffic.
IPv6 has a significantly larger address space than IPv4. This results from the use of a 128-bit address,
whereas IPv4 uses only 32 bits.
When you finish the configuration, click Apply Changes.
BMC Remote Management Console | 96