Physical Disk Issues; Physical Disk In Failed State; Unable To Rebuild A Fault Tolerant Virtual Disk; Fatal Error Or Data Corruption Reported - Dell H310 User Manual

Corrective
The issue occurs
Action:
because of any of
the following
causes:

Physical Disk Issues

Physical Disk In Failed State

Issue: One of the physical disks in the disk array is in the failed state.
Corrective Update the PERC cards to the latest firmware available on dell.com/support.
Action:

Unable to Rebuild A Fault Tolerant Virtual Disk

Issue: Cannot rebuild a fault tolerant virtual disk. For more information, see the alert log for virtual
disks.
Corrective The replacement disk is too small or not compatible with the virtual disk. Replace the failed
Action: disk with a compatible good physical disk with equal or greater capacity.

Fatal Error Or Data Corruption Reported

Issue: Fatal error(s) or data corruption(s) are reported when accessing virtual disks.
Corrective Contact Dell Technical Support.
Action:

Physical Disk Displayed As Blocked

Issue: One or more physical disks is displayed as Blocked and cannot be configured.
Corrective Update the PERC cards to the latest firmware available on dell.com/support.
Action:
• The driver is not native in the operating system.
To resolve the issue, press <F6> to install the RAID device
driver during installation.
• The virtual disks are not configured properly.
To resolve the issue, enter the BIOS Configuration Utility
(<Ctrl> <R>) to configure the virtual disks. For procedures to
configure the virtual disks, see the topic
Applications For PERC
• The controller BIOS is disabled.
To resolve the issue, enter the BIOS Configuration Utility
(<Ctrl> <R>) to enable the BIOS. For information on
configuring virtual disks, see the topic
Applications For PERC
Management
Cards.
Management
Cards.
79