D-Link AirPro DWL-6000AP User Manual page 9

D-Link AirPro wireless devices are pre-configured to connect together, right out of the box, with the
default settings.
You will need a broadband Internet access (Cable/DSL) subscription.
Consult with your Cable/DSL provider for proper installation of the modem.
Connect the modem to an Ethernet Broadband Router (such as the D-Link DI-604+) See
the Quick Installation Guide included with the router.
Connect the router to the D-Link AirPro DWL-6000AP. Refer to the Quick Installation
Guide for setting up the Access Point.
If you are connecting a desktop computer in your network, you can install the D-Link
AirPro DWL-A520 wireless PCI adapter into an available PCI slot. See the Quick
Installation Guide included with the DWL-A520.
Install the drivers for the wireless cardbus adapter (D-Link AirPro DWL-A650) into the
laptop computer. See the Quick Installation Guide included with the DWL-A650 for
installation instructions.
Please refer to the following sections of this manual for additional information about setting up a
network:
Networking Basics- Learn how to check your IP Address; share printers and files.
Using the Configuration Utility- Learn the settings you must use on each computer in your network
for successful communication.
Troubleshooting- Learn how to check for the proper installation of the network adapters' drivers and
other tips for troubleshooting the network.
AirPro DWL-6000AP
7