Pioneer DJM-800 Service Manual page 132

1
9 Mode 9 : Volume Test 4. " VOLTEST "
• This mode displays a value of volume as shown below on a Level Meter.
• H.P. LEVEL,COLOR of CH1,CH2,CH3,CH4
A
• LEVEL/DEPTH
Volume
H.P. LEVEL
CH1 COLOR
CH2 COLOR
CH3 COLOR
B
CH4 COLOR
LEVEL/DEPTH
• This mode displays a value of CH4 TRIM volume in the FL Display.
I will turn on from upper left according to value of TRIM in turn, and only lower berth rightmost edge
of effect name display lights it that I finish turning it.
It displays "VOLTEST4" on the FL display in the first 2 seconds.
Then it displays "VOL 4" on the bottom of ths FL Display. (in order to let you display TRIM value)
C
VOLTEST
D
0 Mode 10 : Fader Test. " FDRTEST "
• Mode that confirms a value of each CH Fader and Cross Fader.
FADER
CH1 FADER
CH2 FADER
CH3 FADER
E
CH4 FADER
CROSS FADER
- Mode 11 : Meter LED Test. " METERTEST "
• Mode that confirms a value of each CH Fader and Cross Fader.
• LED of each CH of Level Meter lights from the bottom one by one when the CUE key is pressed.
The default all Lights off.
It is possible to return to all Lights off when pressing it 15 times
F
again after it presses it (LED on lights most) and to repeat from the beginning.
132
1
2
Lighting LED
Master Level Meter L CH LED
CH1 Level Meter LED
CH2 Level Meter LED
CH3 Level Meter LED
CH4 Level Meter LED
Master Level Meter R CH LED
Lighting LED
CH1 Level Meter LED
CH2 Level Meter LED
CH3 Level Meter LED
CH4 Level Meter LED
Master Level Meter L CH LED
DJM-800
2
3
Remark
"-• " : Lights off
Full Illuminate
"0" :
Lights off
"LOW" :
Full Illuminate
"HI" :
Lights off
"LOW" :
Full Illuminate
"HI" :
Lights off
"LOW" :
Full Illuminate
"HI" :
Lights off
"LOW" :
Full Illuminate
"HI" :
Lights off
"MIN" :
"MAX" : Full Illuminate
Remark
"0" : Lights off
Full Illuminate
"10" :
Lights off
"0" :
Full Illuminate
"10" :
Lights off
"0" :
Full Illuminate
"10" :
Lights off
"0" :
Full Illuminate
"10" :
Full Illuminate
"A" :
"B" : Lights off
3
4
4