Pioneer DJM-800 Service Manual page 145

5
3. Downloading the .mot file into the DJM-800
Turn on the DJM-800(efx1000). Click on the Connect icon
to activate connection of the DJM-800(efx1000) with the
PC.
If the display shown below appears, the connection has
been successfully made.
Right-click on the .mot file and select Download File.
Downloading will start.
5
6
When the message "Image successfully written to device"
is displayed, downloading has been finished.
• Confirming if downloading has been successfully
completed
Right-click on the .mot file, and select Compare File →
Device Checksum.
Check the values enclosed in the frames in the illustration
below. If these two values are the same, downloading has
been successfully completed.
4. Exiting from the program
Click on the Disconnect icon to deactivate connection of the
DJM-800(efx1000) with the PC.
Turn off the DJM-800(efx1000), and unplug the cables of
the RS-232C jig.
DJM-800
6
7
7
8
A
B
C
D
E
F
145
8