Table of Contents
Advertisement
Service door
Description
Service door
Before removing the service door, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Remove the service door:
1.
Lift up on the rear edge of the service door (1) until the left and right sides detach from
the computer.
2.
Remove the service door (2).
Reverse this procedure to install the service door.
34
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page
33).
Spare part number
737253-001
Advertisement
Table of Contents
