Table of Contents
Advertisement
Reverse this procedure to install the heat sink.
Speakers
Description
Speaker Kit (includes left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Service door (see
b.
Hard drive (see
c.
Display assembly (see
d.
Bottom cover (see
e.
Media card reader board (see
f.
Fan (see
g.
System board (see
Battery on page
Service door on page
Hard drive on page
Display assembly on page
Bottom cover on page
Media card reader board on page
Fan on page
61)
System board on page
33), and then remove the following components:
34)
35)
46)
54)
63)
Component replacement procedures
Spare part number
730890-001
60)
67
Advertisement
Table of Contents
