How To Eject Manualy - Hitachi DV-PF7E Service Manual

4-1-3 How to Eject Manualy

A. DVD
1. Remove the Top Case.
2. Rotate the roulette in the direction of the arrow as shown below.
3. Pull the tray slowly with a hand.
DVD Mecha
B. Cassette Tape
1. Disconnect the AC plug.
2. Remove the Top Case and Front Assembly.
3. Make sure that the Moving guide preparations are in the Eject Position.
4. Turn the LDG Belt in the appropriate direction as shown below until the Moving guide preparations come to
the Eject Position. Stop turning when the preparations begin clicking or can not be moved further. However,
the tape will be left wound around the cylinder.
5. Turn the LDG Belt in the appropriate direction continuously, and the cassette tape will be ejected. Allow a
minute or two to complete this task.
B
Deck Mecha
LDG Belt
View for A
Rotate this roulette in
the direction of the arrow
A
View for B
Moving guide T preparation
(Eject Position)
Moving guide S preparation
(Eject Position)
4-5
LOAD
UNLOAD
/EJECT
Side View
LDG Belt