Processing After Completing Playback System Check - Sony DCR-TRV6 Service Manual

• ENCODER Yb BIST Check
8) Select page: 3, address: 10, set data: 8C, and press the PAUSE
button.
9) Select page: 3, address: 12, set data: 10, and press the PAUSE
button.
10) Select page: 3, address: 12, set data: 00, and press the PAUSE
button.
11) Select page: 3, address: 13, set data: 04, and press the PAUSE
button.
12) When the IC301 ENCODER Yb playback system is normal,
the display data (combination data) of page: 3, address: 14 and
15 agrees with any combination as shown below.
NTSC model
Address Data
14 94
15 D6
PAL model
Address Data
14 A1
15 ED
• ENCODER Ca BIST Check
13) Select page: 3, address: 10, set data: 8D, and press the PAUSE
button.
14) Select page: 3, address: 12, set data: 10, and press the PAUSE
button.
15) Select page: 3, address: 12, set data: 00, and press the PAUSE
button.
16) Select page: 3, address: 13, set data: 04, and press the PAUSE
button.
17) When the IC301 ENCODER Ca playback system is normal,
the display data (combination data) of page: 3, address: 14 and
15 agrees with any combination as shown below.
NTSC model
Address Data
14 11 4E
15 FD 3B
PAL model
Address Data
14 E8 7B
15 62 B0
• ENCODER Cb BIST Check
18) Select page: 3, address: 10, set data: 8E, and press the PAUSE
button.
19) Select page: 3, address: 12, set data: 10, and press the PAUSE
button.
20) Select page: 3, address: 12, set data: 00, and press the PAUSE
button.
21) Select page: 3, address: 13, set data: 04, and press the PAUSE
button.
22) When the IC301 ENCODER Cb playback system is normal,
the display data (combination data) of page: 3, address: 14 and
15 agrees with any combination as shown below.
NTSC model
Address Data
14 5C BC
20 A8
15
PAL model
Data
Address
14 96 35
15 79 7C
1-6. Processing after Completing Playback System
Check
1) Select page: 0, address: 01, and set data: 01.
2) Select page: C, address: 42, set the following data and press
the PAUSE button.
00: DCR-TRV6/TRV6E
28: DCR-TRV11/TRV11E
48: DCR-TRV20/TRV20E
3) Select page: 8, address: 21, set data: 03, and press the PAUSE
button.
4) Select page: 0, address: 01, and set data: 00.
5) Turn off the power and turn on again.
5-58