Fujitsu LifeBook T901 Series User Manual page 40

Removing Security Panel Application with
Passwords Still Active
Using this feature will not allow any changes to
the password.
Removing the applications does not remove
the password. It simply removes the utility
to change/add/remove passwords. To
change your password you must reinstall
the application.
User:
1. Go to Start -> Control Panel.
2. Open Add or Remove Programs Properties
in the Control Panel.
3. Select the Security Panel Application in
the list, and click Change/Remove.
4. When the Confi rm File Deletion box appears,
click Yes.
Supervisor:
1. Go to Start -> Control Panel.
2. Open Add or Remove Programs Properties
in the Control Panel.
3. Select the Security Panel Application for
Supervisor in the list, and click Change/
Remove.
4. When the Confi rm File Deletion box appears,
click Yes.
Reinstalling the Security Panel Application
To reinstall supervisor or user security application,
you will need your Drivers and Applications CD.
The Utilities\Security Panel Application folder
contains two separate folders: Supervisor and
User. The setup fi les for supervisor and user
security applications are contained in those
folders.
1. Go to the Utilities\Security Panel Application\
Supervisor folder on the CD and double-click
the setup.exe fi le. The Installing Security
Panel Applica tion window will appear. Follow
the instructions on the screen.
30
2. Go to the Utilities\Security Panel Application\
User folder on the CD and double-click the
setup.exe fi le. The Installing Security Panel
Application window will appear. Follow the
instructions on the screen.
Supervisor and user passwords can be set via
Windows software using the FJSECS.exe and
FJSECU.exe fi les, respectively. FJSECU.exe
for the user password cannot run without fi rst
setting a supervisor password. You need to run
FJSECS.exe fi rst to set the supervisor pass word.
Follow instructions under Setting Passwords on
page 28.