Starting Your Tablet Pc; Power On; Boot Sequence; Registering Your Lifebook T901 Series Tablet Pc - Fujitsu LifeBook T901 Series User Manual

Starting Your Tablet PC

Power On

The Power/Suspend/Resume button is used to
turn on your LifeBook T901 Series Tablet PC
from its off state. Once you have connected your
AC adapter or charged the internal Lithium ion
battery, you can power on your Tablet PC.
When you turn on your Tablet PC be sure
you have a power source. This means that
a battery is installed and charged, or that the
AC adapter is connected and has power.
Press the Power/Suspend/Resume button to
start your system. When you are done working
you can either leave your Tablet PC in Standby
mode, or you can turn it off.
When the system display is closed, the
Suspend/Resume button is disabled. This
feature prevents the system from being
accidentally powered up when not in use.
When you Power On your Tablet PC, it will
perform a Power On Self Test (POST) to check
the internal parts and confi guration for correct
functionality. If a fault is found, your Tablet PC will
emit an audio warning and/or an error message
will be displayed. Depending on the nature of the
problem, you may be able to continue by starting
the operating system or by entering the BIOS
setup utility and revising the settings.
After satisfactory completion of the Power On
Self Test (POST), your Tablet PC will load your
operating system.
Never turn off your Tablet PC during the
Power On Self Test (POST) or it will cause
an error message to be displayed when you
turn your Tablet PC on the next time.
36

Boot Sequence

The procedure for starting-up your Tablet PC is
termed the Bootup sequence and involves your
Tablet PC's BIOS. When your Tablet PC is fi rst
turned on, the main system memory is empty, and
it needs to fi nd instructions to start up your Tablet
PC. This information is in the BIOS program.
Each time you power up or restart your Tablet PC,
it goes through a boot sequence which displays a
Fujitsu logo until your operating system is loaded.
During booting, your Tablet PC is performing a
standard boot sequence including a Power On
Self Test (POST). When the boot sequence is
completed without a failure and without a request
for the BIOS Setup Utility, the system displays
the operating system's opening screen.
The boot sequence is executed when:
• You turn on the power to your Tablet PC.
• You restart your Tablet PC from the Windows
Shut Down dialog box.
• The software initiates a system restart. Example:
When you install a new application.
• You reset the system by pressing the three
keys [Ctrl+Alt+Del].
Registering your LifeBook T901
Series Tablet PC
How do I register?
To register your system, visit our Web site at:
www.hk.fujitsu.com/pc