Removing the Coin-Cell
Battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS settings to
default. It is recommended that you note the BIOS settings before
removing the coin-cell battery.
Prerequisites
1
Follow the procedure from step 1 to step 5 in "Removing the
Assembly".
2
Remove the
3
Remove the
4
Remove the
Procedure
1
Locate the battery socket on the
2
Using the tab on the protective cover, lift the cover off the coin-cell
battery.
62
back
cover.
system-board
shield.
heat
sink.
Computer. After working inside your
After Working Inside Your
system
board.
Stand