Removing the Camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Follow the procedure from step 1 to step 5 in "Removing the
Assembly".
2
Remove the
3
Follow the procedure from step 1 and step 2 in "Removing the
Drive".
4
Remove the
5
Remove the
Procedure
1
Disconnect the camera cable from the system board and remove the
camera cable from the routing guides on the display-panel base.
2
Disconnect the speaker cable from the system board and remove the
speaker cable from the routing guides on the display-panel base.
3
Disconnect the control-buttons board cable from the control-buttons
board.
back
cover.
system-board
shield.
VESA-mount
bracket.
Computer. After working inside your
After Working Inside Your
Stand
Optical
75