Table of Contents
Advertisement
Replacing the Light Pipe Foam
A small rubber gasket directs light from the power indicator LED to the Top Case.
1.
Grasp the Light Pipe Foam and insert it into the well in the Top Case.
Replacing the LCD Module
IMPORTANT:Ensure that no dust, dirt, or finger prints come in to contact with the exposed LCD Module or Top
Case; Foreign particles and grease will affect LCD output performance. If any prints or dust comes
into contact with the LCD, use only water, IPA (Isopropyl Alcohol) or Hexane and approved cleaning
cloth.
1.
Place the LCD Module onto the mainboard.
Chapter 3
47
Advertisement
Table of Contents
