Sim - HP ProBook 4410s Maintenance And Service Manual

5. (15-in models only) If it is necessary to remove the optical drive connector from the system board,
pull the optical drive board straight off the connector on the system board. The optical drive board
is available using spare part number 535862-001.
Reverse this procedure to install the system board.

SIM

Description
SIM
Before removing the SIM, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Switch cover and keyboard (see
b. Optical drive (see
c. Speakers (see
d. WWAN module (see
e. Palm rest (see
f. WLAN module (see
g. Hard drive (see
Battery on page 58).
Switch cover and keyboard on page
Optical drive on page
Speakers on page 67)
WWAN module on page
Palm rest on page 69)
WLAN module on page
Hard drive on page 72)
64)
68)
74)
Component replacement procedures 107
Spare part number
536599-001
59)