HP ProBook 4410s Maintenance And Service Manual page 118

h. Top cover (see
i. Display assembly (see
Display assembly on computers with 14-in displays on page
j. System board (see
Remove the SIM:
1. Position the computer right-side up with the front toward you.
2. Remove the two Phillips PM2.5×3.0 screws (1) that secure the SIM to the system board.
3. Remove the SIM (2) by pulling the module straight up and off the computer.
Reverse this procedure to install the SIM.
108 Chapter 4 Removal and replacement procedures
Top cover on page 83)
Display assembly on computers with 15-in displays on page 77
System board on page
90)
105)
or