System Environment - LG CED-8041B Owner's Manual

DirectCD TM v2.5b(s)
Computer
Software

System Environment

This unit can be operated in the system environment explained
here.
System CPU
requirements
Memory
Hard disk
Interface
Drive bay
Power
Software Required OS
CD-R, CD-RW discs
Occasionally the CD-R and CD-RW discs written by the CD-
R/RW drive cannot be read by other CD drives*. These
unreadable discs should be read using the CD-R/RW drive on
which require written.
* With Windows NT Workstation Ver. 4.0, the drive is usable only
with Adaptec E
* The disc written using the CD-R/RW drive might not be
readable by CD-ROMs other than Multi-read compatible (UDF
compatible) CD-ROMs.
Multiread compatible (UDF compatible) CD-ROMs are:
1. CD-ROMs that can read low reflectance.
2. CD-ROMs that support Packet Write.
Install the supplied CD Recording Software before using this unit.
4
100MHz (or faster) Pentium (for 4x speed,
166MHz or faster recommended)
Windows 98/95 : 32MB or greater.
Windows NT Workstation Ver. 4.0: 32MB or
greater (64MB or over recommended)
Hard disk with average access time of 19 msec
or less, and data transfer speed of 600KB/sec
or greater. 75MB or more free space.
(The free space needed for writing depends on
the quantity of data.)
Enhanced-IDE interface (as Primary Slave,
Secondary Master or Slave)
5.25-inch half-height bay required
+5V/+12V power socket required
Windows 98/95, Windows NT Workstation
Ver.4.0 or later*
CD-R : Ricoh, Mitsubishi Chemical, Verbatim,
Taiyo Yuden, Mitsui Toatsu, TDK, Kodak,
or SKC discs are recommend.
CD-RW : Ricoh, Mitsubishi chemical, Verbatim
discs are recommend.
CD C .
ASY REATOR