For Macintosh Users - Brother DCP-J152W Quick Setup Manual

For Wireless Network Users
One-push setup using
12
WPS or AOSS™
Macintosh and mobile devices)
a
Confirm your wireless access point/router has
the WPS or AOSS™ symbol as shown below.
b
Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment. Refer to the instructions provided
with your access point/router.
If you began the configuration from step 7 on
page 7, go to d.
All other users go to c.
c
On your machine, press Menu.
Press a or b to choose Network. Press OK.
Press a or b to choose WLAN. Press OK.
d
Press a or b to choose WPS/AOSS. Press OK.
When Enable WLAN? is displayed, press OK
to accept.
This will start the wireless setup wizard.
NOTE
If your wireless access point/router supports WPS
and you want to configure your machine using the
PIN (Personal Identification Number) Method,
see Configure Your Wireless Network Using the
PIN Method of Wi-Fi Protected Setup™ (WPS) in
the Software and Network User's Guide.
e
When the LCD instructs you to start WPS or
AOSS™, press the WPS or AOSS™ button on
your wireless access point/router (for more
information, see the instructions provided with
your wireless access point/router), and then
press OK on your machine.
This feature will automatically detect which
mode (WPS or AOSS™) your wireless access
point/router uses to configure your machine.
When OK appears on the LCD, press OK.
OK
NOTE
®
(Windows ,
If the connection failed, check the error code on
the printed report and refer to Troubleshooting
on page 22.
NOTE
For mobile device users:
• Connect your mobile device to a wireless
access point/router using a Wi-Fi connection.
• Download and install Brother iPrint&Scan
(Android™/iOS/Windows
mobile device's application download site. You
can also use AirPrint (iOS) with this machine.
• To download the User's Guide for the
application you are using (Brother
iPrint&Scan/AirPrint), visit the Brother
Solutions Center at
http://solutions.brother.com/ and click Manuals
on your model's page.
• If you began the setup from step 7 on page 7,
go back to step 8 on page 8 to continue the
machine settings.
To install MFL-Pro Suite, continue to
step 13.
For Windows
Now go to
Page 24

For Macintosh users:

Now go to
Page 27
Wireless setup is now complete.
®
Phone) from your
®
users:
21