For Network Users; Reset The Network Settings To Factory Default; Entering Text For Wireless Settings - Brother DCP-J152W Quick Setup Manual

For Network Users

Reset the network settings to factory default

To restore all network settings of the internal Print/Scan server to the factory default, please follow the steps below:
a
Make sure the machine is idle, then disconnect all the cables from the machine (except the power cord).
b
Press Menu.
c
Press a or b to choose Network.
Press OK.
d
Press a or b to choose Network Reset.
Press OK.
e
Press + to choose Yes.
f
Press + to choose Yes.
g
The machine will restart, re-connect the cables once this is complete.

Entering Text for Wireless Settings

Press a, b, d or c to select the number or letter you want to choose, and press OK. Repeat for each character until
the number or name is complete and then press a, b, d or c to select
Inserting spaces
To enter a space in a Name, select
Inserting symbols
Press a, b, d or c to select
want to choose, and press OK.
If you want to return to the numbers and letters display, press a, b, d or c to select
Making corrections
If you entered an incorrect number or letter and want to change it, press a, b, d or c to select
Press OK several times to move the cursor under the incorrect character. Then press a, b, d or c to select
and press OK. Enter the correct letter.
30
010310
0 1 2 3 4 5 6 7
A B C D E F G H I J
K L M N O P Q R
U V W X Y Z
and press OK.
, and press OK to display symbols. Press a, b, d or c to select the symbol you
OK OK , and press OK.
8 9
S T
OK OK
, and press OK.
or .
,