Kenwood DNX6140 Instruction Manual page 113

Installing the Microphone Unit
(DNX6140lDNX6000EXIDDXS034BT only) . .... _
1. Check the installation position of the microphone
(accessory
@l.
2. Remove oil and other dirt from the installation
surface.
3. Install the microphone.
4. Wire the microphone cable up to the hands-free
box with it secured at several positions using tape
or the like.
Accessory
®
Fix a cable with a commercial
item of tape.
Installing the Escutcheon
1. Attach accessory
®
to the unit.
Accessory
®
'.
-
-.'
Peel the release coated paper of double-face adhesive tape
to fix on the place shown above.
Adjust the direction of the microphone to the driver.
~
Install the microphone as far as possible
~ from the celi-phone.
English
I 9