Ring Resume Function - Panasonic CF-C1 Series Reference Manual

Modem

Ring Resume Function

The computer automatically resumes from
modem rings.
You will need software to keep the computer in an idle state waiting for a phone call, and if you prefer, to turn the computer to
Windows 7 sleep/
Windows XP
application.
Windows 7
1
Click (Start) - [Windows Fax and Scan].
2
Click [Tools] - [Fax Settings].
A standard user needs to enter an administrator password.
Check whether the modem you are using is displayed in Device name. If not, click [Select fax device] and select
the correct modem.
3
Add a check mark for [Allow the device to receive fax calls] and click [OK].
4
Click (Start) - [Computer] - [System properties] - [Device Manager].
A standard user needs to enter an administrator password.
5
Double-click [Modems], and then double-click the internal modem.
6
Click [Power Management] and add a check mark for [Allow this device to wake the
computer], and then click [OK].
Windows XP
1
Click [start] - [Printers and Faxes].
2
Click [Set up faxing] in the [Printer Tasks] area on the left.
This operation is not necessary next time.
3
Right-click the fax icon and then click [Properties].
4
Click [Devices] - [Properties].
5
Click [Receive], and then add the check mark for [Enable device to receive] and click
[OK].
sleep/
Windows 7
standby again afterward. For further information, refer to the instruction manual of the software
standby when the telephone connected to the
Windows XP
117