Problems With Wireless Lan; Access Point Is Not Detected; Cannot Communicate With The Access Point - Panasonic CF-C1 Series Reference Manual

Troubleshooting (Advanced)
Problems with Wireless LAN (only for models with wireless LAN)

Access point is not detected

Shorten the distance between the computer and the access point, and try the detection again.
Confirm the following settings:
• [Wireless LAN] in the [Advanced] menu of the Setup Utility
Confirm that [Wireless LAN] is set to [Enabled]. (
• Wireless LAN power supply
Slide the wireless switch to the right (ON).
<CF-C1 Series>
This computer uses channels 1 through 11
point.
If there are more than one wireless function equipped, right-click the Wireless Switch Utility icon (
confirm that [Wireless LAN ON] has been checked.
*3
In the case of wireless communications, the frequency band being used can be divided into segments, so that different communications
can be conducted on each band segment. A "Channel" refers to the individual frequency bandwidth divisions.

Cannot communicate with the access point

Using the following procedure, confirm whether the computer's protocol settings are correct (only when using TCP/IP).
Windows 7
Click or on the notification area, and click [Open Network and Sharing Center].
A
Click [Manage network connections].
B
Right-click [Wireless Network Connection] and click [Properties].
C
A standard user needs to enter an administrator password.
Click [Internet Protocol Version 4 (TCP/IPv4)] and click [Properties].
D
Confirm the protocol settings such as IP address, and do the settings properly again.
E
page 138)
<CF-F9 Series>
*3
when using IEEE802.11b/g. Check the channel being used by the access
169
page 123) and