Viewfinder Indications - Hitachi S-3000W Operating Instructions Manual

Viewfinder indications

Lighted indicators
The following lighted indicators appear above and below the viewfinder screen.
Ｔ Ｂ
Ｓ
！
Viewfinder screen indications
Press Check button
Check mode
(Note) Check mode is produced for about 3 seconds after pressing the Check button. Then return to CAM mode.
T:TALLY (Tally)
B:BATT (Battery)
S:VTR SAVE (VTR save)
(Setting discrepancy)
!:
Power switch on
Output switch
CAM or BAR
CAM mode
Operate other than Func or
1 line display mode
VTR connected: Lights during recording
CCU connected: Lights at tally signal
Lights to indicate low battery voltage.
Immediately replace the battery when
lighted.
Lights when Power switch is set to VTR
Save.
lights in the following situations
Gain switch other than Low
Shutter switch on
Contrast (Function 1 menu) other than off
BAR mode (Date, time, ID)
Check button
48
'
Press Func button
Function mode