Function Menu Screen - Hitachi S-3000W Operating Instructions Manual

Function menu screen

Settings with Function menu
Preparation menu
Settings can be changed by using the Function menu. The principal settings are as follows.
Mode Menu
1) CAM Setup Card
2) CAM Function 1
3) CAM Function 2
4) CAM VF Display
5) BAR Bar Function
6) BAR GL Set
7) BAR ID Set
8) BAR Time/Date
9) CAM Special Set
Masking
DTL
Gamma
Knee/Clip
White Shading
Flare
System
Operation and menu screens
Operation is from the function and direction buttons.
FUNC : Function screen on/off.
: Change page when cursor is at 1st line. When a sub-menu is
displayed, press
When the cursor is at the 2nd line or lower, use the buttons to
change the item setting or shift to a sub-menu.
At the main menu, press
At the Initialize line, press both buttons simultaneously to
initialize the settings.
: Shift the cursor vertically.
To display the full menu, hold the
Description
Settings when using setup card
Memory items for each scene file
Other memory items
Viewfinder display selection
Main menu for Bar mode
Genlock adjustment
Identification code input
Time and date setting
Use for detailed settings
Masking adjustment
Detail adjustment
Gamma adjustment
Knee and white clip adjustments
White shading adjustment
Flare adjustment
System adjustment
to return to the main menu.
to display a designated sub-menu.
button pressed and press the Func button.
54