2-4.3 Installation Of Transceiver In Carrying Harness - Motorola HF-SSB Owner's Manual

2-4.3 Installation of Transceiver in Carrying Harness
1. Place the carrying harness on a level surface, with the metal braces facing
upward.
2. Place the micomTrooper on the top of the carrying harness, with its front
panel upwards and its rear resting on the carrying harness (see figure).
Note position of audio connectors: they must be to the left.
3. Connect the three-pin D-type power connector of the power cable to the
micomTrooper power connector. Fasten securely the two connector
screws.
4. Connect the other connector of the power cable to the battery connector.
Fasten securely the connector screw.
2-8