Timer - Mitsubishi Electric DX-TL5000E Installer Manual

Timer

Timer
This menu is used to program the timer recording. 2 most
frequently used operation patterns can be set. By
individually setting the recording camera, recording rate,
and picture grade for normal/alarm recording to <Set
Recording Pattern A> to <Set Recording Pattern D> (Setup
Menu Recording), settings can be changed instantly by
switching "Program Mode."
Setup Menu
2 Timer
1 Program Selection and Program Overview
2 Timer program 1 overview
3 Timer program 2 overview
2 Configure Timer Program 1
Configure Timer Program 2
3
Define Holidays
4
• Before you start recording, accurately set the present
date and time (for setting the date and time,
page 55).
(Setting the program:)
1. Select the timer program line to be set.
step
• Up to 8 programs can be set in one program
number.
Clear: Clears all the setting for the selected line.
• When the recording period of 2 or more programs
are overlapped, the higher-numbered program is
given priority for recording. (
2. Set the detailed settings for each program line.
step
2-1 Day of The Week
Set the day of the week from Sunday to Saturday.
Everyday: Records at the programmed time
everyday.
Special: Records for the period specified in special
day of the week.
Holiday: Applies holidays specified in the holiday
settings. This setting is carried out by priority,
regardless of the program number.
2-2 Time
Set the program start and end time. (The time is
indicated using the 24-hour system.)
2-3 Program Mode
Record A to Record D: Records by using the
cameras and rates which are set in <Set Recording
Pattern A> to <Set Recording Pattern D> (Setup
Menu Recording).
Copy B: Makes the backup of the data to the copy
B device.
Skip: Temporarily skips the recording (the recording
does not perform for the specified time period of
that program).
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
• When you make the backup in timer recording, set
2-4
• When the motion detection is set to "Active" in "Record
6
step
5
step
step
1 to 3
steps
step
4
step
• When setting the end time of the holiday program over
see
step
See the next page.) (Carrying out timer recording:)
step
step
step
• TIMER button does not function during alarm
• When setting a holiday in holiday setting and select
the start and end time so that the backup time is 10
minutes or more.
Motion Detection
Active: Performs the motion detection function
during timer recording.
Inactive: Does not perform the motion detection
function during timer recording.
A," the motion detection pattern of the alarm trigger
which is set in <Set Recording Pattern A> is used. When
the alarm trigger is set to "External," the motion detection
recording is not available in the timer recording even if
the motion detection is set to "Active" in timer setting.
3. Set the special day of the week.
• Set the start and end day of the week. The time
period between start and end day of the week
set here becomes available when setting
"Special" for "Day of The Week" on step 2-1.
4. Set the holidays.
• Set the date and month for the holiday operation.
00:00, the holiday program is executed until the set
end time, and then the program returns to the normal
program.
For example, when 01/01 is set for holiday:
From 01/01 07:00 to 02/01 06:00, program mode is set to Holiday.
From 02/01 06:00, program mode is set to the normal program.
01/01 02/01
00:00 07:00 00:00
Holiday program
5. Display the overview screen to check the timer
recording settings you have set.
6. Select the program number to be used from program
1 or 2 in the program selection.
7. Exit the menu screen.
8. Press the TIMER button on the front panel of the
unit.
• The TIMER indicator lights up.
• The power turns off and the unit switches to the
timer recording stand-by mode. When the present
time is within the programmed time period for the
timer recording, timer recording starts.
• Timer recording and timer recording stand-by
mode can be cancelled by pressing the TIMER
button again for more than 2 seconds.
recording.
"Holiday" in the day of the week settings, the program
selected with "Holiday" is given priority over the other
programs.
Setup Menu
06:00
Normal program
51